| Why Bulwagga Anchors out perform
every other anchor…
The
symmetrical three fluke
configuration insures the anchor
lands in perfect deployment position
every time it reaches the bottom.
Once on the bottom (1),
a pull on the
rode shifts the anchor onto the leading
edges of two flukes (2).
The full weight of the anchor then pitches
forward onto the points, which begin to
penetrate immediately (3).
The Bull's balanced, deep burrowing action secures your boat
within a few feet on just about any type of bottom.
On rock bottoms, the points quickly engage crevices.
The bulky shanks on other anchors cause resistance that prevents deep
sets. The Bull's slender
super strength alloy shaft reduces resistance, so the flukes dig deep
immediately. Wind shifts
that dislodge other anchors just cause The Bull to dig deeper.
In the unlikely event it dislodges,
The Bull will rotate onto an adjacent fluke and quickly reset itself.
The Weed Buster
The geometry of
the Bull allows it to straddle a weedy bottom on its edges
rather than "bed down" on weeds, only to snag them
for a false "set".
When a load is applied, the Bull immediately rotates up onto
its points and
quickly penetrates the weeds to begin its deep setting action.
(click on image to enlarge)
Due to the trefoil
configuration, the Bull always has a vertical "stabilizer"
fin
that keeps the anchor from tipping or sliding as it buries in a
set. The vertical
fluke keeps the anchor digging down evenly and on a level plane
for maximum
engagement on the two holding flukes.
The Bull In Action
Below are 2 actual video
clips of the Bulwagga Anchor at work.
An orange marker is positioned as a reference of how quickly
the points engage and burrowing begins.
The Bull adjusts to sudden
wind and current shifts by rotating onto
an adjacent fluke and quickly re-establishing a set.
Retractable Shank
The trefoil design of the anchor allows The Bull to rotate
while seeking to engage its flukes in crevices on rock
bottoms.
Removing the limiting pin allows the shaft to retract
through the crown,
so you can "back the anchor out" when anchoring where
snags under
rocks, logs or other submerged obstacles are likely.
(click image for enlargement)
If you could always
anchor under ideal conditions, many anchors would work.
If an anchor's appearance is more important than its performance, you
will find
some that are more attractive. But a Bull on the bow is a lot more
beautiful
than a boat on the rocks. For serious boaters unwilling to compromise
safety
and security, the Bulwagga Anchor is the only anchor to buy. Buy
one, and you will agree that The Bull
is the best insurance a boater can have.
Crafted with pride in the U.S.A. using only the best materials, every
Bulwagga
Anchor is hot dipped galvanized with a durable, rust proof finish and
features
a super strength alloy shank and retaining pin.
Bulwagga Anchors provide unprecedented reliability. Quite
simply, The Bull is...
The World's
Most Dependable Anchor! TM
|
